|
|
For a full description of each item follow the order code links below. Select the item
you wish to order by entering the quantity required in the box next to the order code. Press the add to cart button to show the order total in the shopping cart. To complete your order follow the shopping cart instructions.
Please read our terms and conditions before ordering.
For further information please contact
us: sales@gps-pie.com
Accessories are not available separately.
If
you experience any problems using our shopping cart please check that you have javascript and cookies enabled in
your browser.
|
|
|
|
The BlackBoxCameraTM
Company uses 128bit secure server software to ensure that
your credit card is protected against fraudulent use while on our site. |
|
|
 |
| Cart Contents: Subtotal £0.00 |
| Subtotal excludes shipping and handling |
|
|
|
 |
| L80 GPS Module board with IMU and pressure sensor |
| The GPS-PIE L80 slice GPS module features a Quectel L80 GPS receiver combined with a BNO055 9 degree of freedom (9DOF) motion sensor and MS5637 barometric pressure sensor in a RaspberryPi pHAT format. |
| More details... |
| Order Code |
Price |
Quantity |
| L80_SLICE |
£24.99 |
|
|
|
 |
| GMM GPS Module board with IMU and pressure sensor |
| The GPS-PIE Gmm slice GPS module features a GlobalTop Gmm-u1 GPS receiver combined with a BNO055 9 degree of freedom (9DOF) motion sensor and MS5637 barometric pressure sensor in a RaspberryPi pHAT format. |
| More details... |
| Order Code |
Price |
Quantity |
| GMM_SLICE |
£22.99 |
|
|
|
 |
| Development Environment on 16GB SD card |
Example Source Code Development Environment on 16GB SD card with Raspbian operating system freshly installed.
Ready to run on a Raspberry Pi with all the correct settings and dependencies.
Not available separately |
| More details... |
| Order Code |
Price |
Quantity |
| DEV_ENV |
£4.50 |
|
|
|
 |
| Female SMA socket to male u.FL pigtail |
Female SMA socket to male u.FL pigtail. Use to connect active GPS antenna to GPS-PIE slice boards. Length 15cm (6 ins)
Not available separately |
| More details... |
| Order Code |
Price |
Quantity |
| PIGTAIL |
£3.00 |
|
|
|
 |
| Right angle female SMA socket |
Right angle female SMA socket. Can be installed on GPS-PIE slice boards to allow direct connection of an active GPS antenna
Not available separately |
| More details... |
| Order Code |
Price |
Quantity |
| RA_SMA |
£3.00 |
|
|
|
 |
| GPS active antenna with 3m cable |
GPS active antenna with 3m cable. Order with the pigtail connector cable or the SMA socket for use with the GPS-PIE slice module boards.
Not available separately |
| More details... |
| Order Code |
Price |
Quantity |
| ANTENNA |
£8.00 |
|
|
|
 |
| 2x20 Male Header |
2x20 Male header for Raspberry Pi Zero.
Not available separately
|
| More details... |
| Order Code |
Price |
Quantity |
| MALE_HEADER |
£1.00 |
|
|
|
 |
| Supply Header Installed |
By default each GPS-PIE slice module is supplied with a loose 2x20 Female header which you can solder to the board yourself. Order this product option to have the header supplied soldered to the board ready for use.
Not available separately
|
| More details... |
| Order Code |
Price |
Quantity |
| INSTALL_HEADER |
£2.00 |
|
|
|
|
|
© The BlackBoxCameraTM Company Limited 2023
|
